|
 |
Registration Program
Terms and Conditions - Appendix 5 [revised 2004-08-23]
Table of Contents
April 2, 2004
Requirements for Inspection Certificates
1.0 Certificates of Inspection
A certificate of inspection is to be issued as required by the applicable legislation.
1.1 Electricity and Gas
The authorized service providers must issue a certificate that meets the requirements delineated in Section 21 of the Electricity and Gas Inspection Regulations and in Bulletin Gen-27 Policy on the Issuance of Inspection Certificates and the Recording of Test Results under the Electricity and Gas Inspection Act. The requirements for a contractor’s meter record system are delineated in Section 11 of the Electricity and Gas Inspection Regulations.
1.2 Weights and Measures
The certificate must be approved by Measurement Canada. The Weights and Measures Inspection Certificate Completion Manual for authorized service providers stipulates the required codes and sample certificate design. The inspection certificates must have an original and a minimum of two copies: original for device owner; first copy forwarded to a location specified by Measurement Canada; second copy for authorized service provider’s records file.
previous page
|
Measurement Canada
