Production

Light-Guard will be manufactured using standard electronic assembly techniques.

All electronic circuitry will be mounted on a printed circuit board which will be installed in a plastic moulded case.

The electronic printed circuit board will be manufactured under sub-contract by a local electronics manufacturing company.

Light-Guard Manufacturing will supply all materials to the sub-contractor.

The plastic case will be manufactured by a local plastics manufacturing company.

All materials and components for the product are readily available "off-the-shelf" from at least three suppliers.

Light-Guard Manufacturing Ltd. will assemble the electronic printed circuit board in the plastic case and test the product before shipping.

A total of 6 assembly personnel, plus an assembly line supervisor, will be required to assemble the product.

Two test technicians will be required to inspect and test the product before shipping.

Approximately 4,000 square feet of space will be required to store inventory, assemble and test the product.

Special semi-automated equipment will be required to test the product after assembly.

Each unit will undergo 24 hours of continuous testing before shipping to a customer.

Suitable manufacturing space has been identified in Richmond. The owners of the property are prepared to enter into a 3 year lease agreement or longer if required.

Three months from the time that financing has been arranged will be required to set up manufacturing and start production of the first 1000 pieces.

The first 1000 production units will be complete within two months after the start of production.

Return to Sample Business Plan Table of Contents