![Recertification](/web/20061102131940im_/http://ndt.nrcan.gc.ca/images/banner_recertification_e.jpg)
RECERTIFICATION (BY EXAMINATION)
Recertification is conducted to verify an individual's current knowledge.
Certified individuals will have to recertify by successfully completing
a simplified examination prior to the tenth anniversary of their initial
certification and every ten years thereafter.
Currently, recertification is done by practical examination for Levels
1 and 2 and by written examination for Level 3. However, there have been
some recent moves in Europe to investigate alternative methods such as
logbooks for recertification of Levels 1 and 2. Until the international
community decides on procedures, we recommend waiting until NRCan issues
a request for recertification.
RECERTIFICATION EXAMINATIONS —
CONTENT, DURATION AND FEES
A minimum average of 80% must be obtained on the recertification examination
for all methods, levels and sectors.
| Industrial Radiography (RT)
| Ultrasonics (UT) |
| Magnetic Particle (MT) | Liquid
Penetrant (PT) | Eddy Current (ET) |
RT Level 1, Engineering, Materials
and Components (EMC) Sector
Practical Examination, 2 hours
Inspect, according to a written technique, one weld and one casting/forging
and submit developed film along with techniques.
Fees: Natural Resources Canada (NRCan): $125 ($50 application,
$75 registration) Test centre: $75
RT Level 2, EMC Sector
Practical Examination, 4 hours
Inspect 1 of 3 test parts (consisting of 1 heavy/light casting/forging;
1 X-ray weld; and 1 gamma weld) and submit a completed written technique
with developed film. Follow safety procedures.
Interpret 5 of 10 defect indications selected from the aforementioned
categories.
Fees: NRCan: $150 ($50 application, $100 registration)
Test centre: $120
RT Level 2, Welds/Weldments Sector
Practical Examination, 4 hours
Inspect 1 of 3 weld/weldments and submit a completed written technique
with developed film.
Interpret 5 of 10 weld defect indications. Follow safety procedures.
Fees: NRCan: $150 ($50 application, $100 registration)
Test centre: $120
RT Level 2, Light Alloy Castings/Forgings Sector
Practical Examination, 4 hours
Inspect 1 of 3 light alloy castings and submit a completed written technique
with developed film.
Interpret 5 of 10 light alloy casting/forging defect indications. Follow
safety procedures.
Fees: NRCan: $150 ($50 application, $100 registration)
Test centre: $120
RT Level 2, Heavy Metal Castings/Forgings Sector
Practical Examination, 4 hours
Inspect 1 of 3 heavy metal forgings and submit a completed written technique
with developed film.
Interpret 5 of 10 heavy metal casting/forging defect indications. Follow
safety procedures.
Fees: NRCan: $150 ($50 application, $100 registration)
Test centre: $120
RT Level 2, Aerospace Sector
Practical Examination, 4 hours
Inspect 1 of 3 aerospace structures/components and submit a completed
written technique with developed film. Interpret 5 of 10 aerospace X-ray
film. Follow safety procedures.
Fees: NRCan: $150 ($50 application, $100 registration)
Test centre: $120
RT Level 3, EMC Sector
Written Examination, 1 ½ hours
Answer 5 out of 6 questions on a code/specification; 5 out of 6 questions
on the CAN/CGSB 48.9712 Standard; and 30 out of 33 questions on applications
of method/sector.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $40
RT Level 3, Aerospace Sector
Written Examination, 1 ½ hours
Answer 5 out of 6 questions on a code/specification; 5 out of 6 questions
on the Can/CGSB 48.9712 Standard; and 30 out of 33 questions on applications
of method/sector.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $40
UT Level 1, EMC Sector
Practical Examination, 3 hours
Inspect by contact, according to a written instruction, one section of
a weld and one section of a wrought product. Report results according
to specific points.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $90
UT Level 2, EMC Sector
Practical Examination, 3 hours
Inspect one weld by contact and inspect either one wrought product by
contact or one extruded aluminum specimen by immersion. Evaluate indications
and complete report according to specific points.
Fees: NRCan: $150 ($50 application, $100 registration)
Test centre: $100
UT Level 3, EMC Sector
Written Examination, 1 ½ hours
Answer 5 out of 6 questions on a code/specification; 5 out of 6 questions
on the Can/CGSB 48.9712 standard; and 30 out of 33 questions on applications
of method.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $40
MT Level 2, EMC Sector
Practical Examination, 2 ½ hours
Inspect one weld using colour contrast dry powder with yoke or cable wrap
and two test specimens using a horizontal wet bench with fluorescent particles.
Interpret indications and complete report. Final grade is based on best
two samples.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $75
MT Level 3, EMC Sector
Written Examination, 1 ½ hours
Answer 5 out of 6 questions on a code/specification; 5 out of 6 questions
on the Can/CGSB 48.9712 standard; and 30 out of 33 questions on applications
of method.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $40
PT Level 2, EMC Sector
Practical Examination, 1 ½ hours
Inspect one colour contrast solvent removable, and two other test specimens
using either w.w. fluorescent or post-emulsifiable fluorescent penetrant.
Interpret indications and complete report. Final grade is based on best
two samples.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $75
PT Level 3, EMC Sector
Written Examination, 1 ½ hours
Answer 5 out of 6 questions on a code/specification; 5 out of 6 questions
on the Can/CGSB 48.9712 standard; and 30 out of 33 questions on applications
of method.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $40
ET Level 1, EMC Sector
Practical Examination, 3 hours
Perform, according to a written instruction, a non-conductive coating
measurement, a crack sizing, and a tube inspection. Report results according
to specific points.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $90
ET Level 2, EMC Sector
Practical Examination, 3 hours
Inspect either fastener holes or plates of one fastened assembly and one
tube. Complete report according to specific points.
Fees: NRCan: $150 ($50 application, $100 registration)
Test centre: $100
ET Level 3, EMC Sector
Written Examination, 1 ½ hours
Answer 5 out of 6 questions on a code/specification; 5 out of 6 questions
on the Can/CGSB 48.9712 standard; and 30 out of 33 questions on applications
of method.
Fees: NRCan: $125 ($50 application, $75 registration)
Test centre: $40
![Top of page](/web/20061102131940im_/http://ndt.nrcan.gc.ca/images/Arrow.gif)
|