For additional information, please contact Joseph Côté at 957-2496. |
|
TBITS 38: Advanced card technologies - Physical parameters and appearance of the Government of Canada employee technology card - Implementation Criteria![,](/web/20061130174108im_/http://www.tbs-sct.gc.ca/cioscripts/images/line450x1.gif) |
1.1 |
Name |
|
Advanced card technologies - Physical parameters and appearance of the
Government of Canada employee technology card |
1.2 |
Identifier |
|
TBITS -38 |
1.3 |
Category |
|
Standard - Draft |
1.4 |
Effective date |
|
May 1998 |
1.5 |
Approving authority |
|
ACIM Endorsement (December 18, 1997) |
1.6 |
Maintenance agency |
|
Infrastructure Investment Management |
|
Treasury Board Secretariat |
1.7 |
Cross index |
|
ISO 7810-1985 |
Identification cards - Physical characteristics. |
ISO 7811-1985 |
Identification cards - Recording technique - Part 2: Magnetic stripe. |
ISO 7811-1985 |
Identification cards - Recording technique - Part 4: Location of
read-only tracks - Tracks 1 and 2 |
ISO 7811-1985 |
Identification cards - Recording technique - Part 5: Location of
read-write track - Track 3. |
ISO/IEC 7816-1-1987 |
Information technology - Identification cards - Integrated circuit(s)
cards with contacts - Part 1: Physical characteristics. |
ISO/IEC 7816-2-1987 |
Information technology - Identification cards - Integrated circuit(s)
cards with contacts - Part 2: Dimensions and location of contacts. |
|
1.8 |
Related documents |
|
RCMP Security Guide, SSB/SG-27, Identification cards/Access badges (June
1992) |
This Treasury Board Information and Technology Standard (TBITS-38) is not intended as
government standard for government employee ID cards. Rather, it is a standard for
government employee technology cards. Departments are free to design their own ID cards
and these designs differ in accordance with each department's particular needs. This
design for the employee technology card was based on a sample of departmental ID cards so
that, should any department choose to combine its employee technology card with its ID
card, the result would be similar to the design in this TBITS.
This standard adopts the physical parameters specified in the ISO/IEC standards listed
in paragraph 1.7 for use by the Government of Canada as its specifications for a
government employee technology card that includes any combination of the three
technologies: integrated circuit (chip), magnetic stripe and/or bar code. As such, the
standards in paragraph 1.7 are to be considered an integral part of this standard.
Compliance with these standards is required to achieve the following benefits:
- the portability of technology cards among different vendors' equipment and among
departments and agencies;
- the development of common applications shared by all departments and agencies; and
- a reduction in the number of cards a government employee is required to possess.
This standard also adopts the design in Appendix A for the visual information printed
on the government employee technology card including the location of this information on
the front and back of the card. Departments and agencies are encouraged to follow this
standard for their employee technology cards in order to promote common recognition of
these cards and to permit their portability between departments and agencies, for example,
when employees are transferred, seconded or require temporary access to another department
or agency.
Departments and agencies contemplating the use of other technologies for their employee
technology cards, e.g., optical media, are encouraged to contact the TBITS Advanced Card
Technology working group to ensure that government-wide implications are considered.
Departments and agencies are also encouraged to contact this working group when
contemplating the use of any type of technology cards for the delivery of their programs
and services (cards issued to the public) so that a common approach can be developed among
departments and agencies with similar needs.
This standard applies to cards issued to government employees for internal government
operations that require information to be accessible from any combination of the three
technologies: integrated circuit (chip), magnetic stripe and/or bar code.
While the use of this standard is not mandatory, departments are strongly encouraged to
adopt the first part of this standard (the physical parameters) since it is based on
international standards widely adopted by industry and a common standard is necessary for
interdepartmental interoperability. It is recommended that departments also adopt the
second part of this standard for the appearance of their employee technology and minimize
any change to the overall appearance of the card if it must be revised to meet their
requirements.
This standard has no retroactive application and does not require the alteration or
refitting of existing advanced technology card applications.
This standard is not intended to restrict departments and agencies to cards employing
these three technologies; however, to ensure interdepartmental portability, departments
are encouraged to use cards complying with this standard whenever appropriate.
When departments and agencies have operational requirements that require information on
their employee technology cards in addition to that included in the design standard, they
should first consider storing the information on the card electronically. Where this is
not possible, departments and agencies should add the additional information but in a
manner that respects the overall design as much as possible to preserve common recognition
of these cards.
This TBITS specifies the ISO/IEC standards in Paragraph 1.7 and the design standard in
Appendix A for use by the Government of Canada.
The effective date of this standard is May 1998.
Advanced Card Technologies (ACT)
Canadian Heritage
Alois Schwarzer
Peter J. O'Hara (chairperson)
Canadian Radio-Television and Telecommunications Committee
Mike Charette
Citizenship and Immigration
Steve Nicolaiff
Communications Security Establishment
Lenora Haldenby
Blaine Hein
Tom Kung
Environment Canada
Dave Goods
Jacques Telmosse
Human Resources Development Canada
Robert L. Robinson
Justice Canada
Lita Cyr
National Defence
Pierre Rivard
Office of the Privacy Commissioner
Brian Foran
Public Works and Government Services Canada
Ray Melnick
Régie de l'assurance-maladie du Québec
Claude Vaillancourt
Revenue Canada
Jean Charbonneau
Dave Morrow
RCMP
Rick Brouzes
Dwight Edmondson
Marc Gaudet
Don Wagman
Transport Canada
Gordon Creelman
Treasury Board Secretariat
Stewart Houlden
Alan Way
Copies of the technical specifications (see Paragraph 1.7) may be obtained as follows:
Standards Council of Canada
270 Albert Street, Suite 200
OTTAWA ON K1P 6N7
Tel.: (613) 238-3222
Fax: (613) 569-7808
Web: http://www.scc.ca/en/index.shtml
|