|
|
|
One of the most frequently asked questions regarding the Transportation of Dangerous Goods (TDG) Regulations is "What do I need to know to comply?" This question usually prompts us to ask in return "Have you been trained in the TDG Regulations?" Training is the key to complying with the Regulations. A person must be able to find information in the Regulations, determine if a product is a dangerous good, determine if the dangerous goods are regulated and finally be able to use the Regulations. Each of these points is elaborated. 1. Training in the TDG RegulationsThe TDG Regulations require that any person who handles, offers for transport and/or transports dangerous goods be trained or working under the direct supervision of someone who is trained. The responsibility to ensure people are trained and the manner in which this training is to be conducted rests with the employer. All trained persons must hold a training certificate. The training must be based on the duties that the person is expected to perform and to the dangerous goods that he/she is expected to handle, offer for transport or transport. (Part 6 of the TDG Regulations). For example, the person who completes the shipping document must be trained on the requirements of Part 3 - Documentation. For more information, please consult the Advisory Notice on Training Guidelines. 2. Finding information in the TDG RegulationsThe TDG Regulations are broken down into 16 parts and 3 schedules. The parts provide the regulatory requirements for the transportation of dangerous goods. The schedules provide additional information that complement the parts.
3. Determining if a Product is a Dangerous GoodsIt is the consignor's responsibility to classify a substance, product or organism to determine if it is a dangerous good. There are two ways to classify goods:
Schedule 1 lists the dangerous goods by UN number and provides information on all classes of dangerous goods, such as, classification, quantity exemptions and limitations, special provisions and emergency response plans. Part 2 defines the criteria of the nine classes of dangerous goods and is usually referred to when the dangerous goods are not listed by name in Schedule 1. Always refer to Schedule 1 first. Find the UN Number of the dangerous goods under Column 1 in Schedule 1. If the UN number is not known, refer to the shipping names alphabetical index in Schedule 3 to search the UN number. Forbidden Dangerous GoodsSchedule 3 lists the dangerous goods shipping names in alphabetical order. It includes dangerous goods that are forbidden for transport. Schedule 1 also forbids dangerous goods from being transported when the word "forbidden" is shown in column 3, class.
4. Determining if Dangerous Goods are regulatedVerify if any special provision numbers are present under Column 5 of Schedule 1. Special provisions are found in Schedule 2, and may provide an exemption from certain parts or sections of the Regulations. If there are no special provisions in Schedule 2 exempting dangerous goods, verify sections 1.15 to 1.46 - Special Cases in Part 1. Some of the exemptions are partial, that is, they may be exempt from certain sections or parts of the Regulations with some conditions. The conditions of the exemption must be strictly adhered to. For example section 1.25 states:"These Regulations do not apply to dangerous goods that are transported solely within a manufacturing or processing facility to which public access is controlled." If there are no exemptions in Schedule 2 - Special Provisions or Part 1 - Special Cases, the dangerous goods are fully regulated. Modal RequirementsParts 9, 10, 11 and 12 deal specifically with a mode of transport, respectively, road, rail, marine and air. PermitsPermits may also allow a relief from certain requirements of the Act and the Regulations. The conditions of the permit must be strictly adhered to. Two types of permit exist:
1 Application for a permit is made to the Minister or a designated person (Transport Dangerous Goods Directorate, Transport Canada) 5. Using the RegulationsThe Regulations apply to dangerous goods if they are not exempted in Schedule 2 - Special Provisions or Part 1 - Special Cases. In addition to training, classification, special provisions and special cases, the following requirements of the Regulations also apply.
Accidental Release and Imminent Accidental Release Report Requirements - Any accidental release and imminent accidental release as specified in Part 8 must be reported by the person having possession of the goods. There is also a requirement for the employer to complete a follow-up report within 30 days. This advisory notice was produced to facilitate understanding of the TDG Regulations. For specific information, the Act and Regulations must be consulted. |
|
Transport Canada |
Pacific Region |
Prairie & Northern Region |
Ontario Region |
Quebec Region |
Atlantic Region |
About us |
Our offices |
Organization and senior management |
Departmental publications |
Programs and services |
Acts |
Regulations |
[More...] |
Media room |
Advisories |
Contacts |
e-news |
News releases |
Photo gallery | Reference centre |
Speeches |
[More...] |
Emergencies |
Emergencies and crises |
Emergency preparedness |
Security |
Transport of dangerous goods |
[More...] |
Air |
Our offices |
Passengers |
Pilots |
Flight instructors |
Maintenance technicians |
Commercial airlines |
Security |
Transport of dangerous goods |
[More...] |
Marine |
Our offices |
Small commercial vessels |
Large commercial vessels |
Pleasure craft |
Marine security |
Marine infrastructure |
Transport of dangerous goods |
[More...] |
Rail |
Our offices |
Safety at railway crossings |
Rail infrastructure |
Transport of dangerous goods |
[More...] |