PDF version

NEXT

Document Information

PART 1 — GENERAL

• 1.1 — DEFINITIONS
• 1.2 — MEASUREMENT OF LENGTH (L)
• 1.3 — UNITS OF MEASUREMENT AND DEGREE OF ACCURACY

• 2.1 — GROSS TONNAGE FORMULA
• 2.2 — NET TONNAGE FORMULA
• 2.3 — CHANGE OF NET TONNAGE
• 2.4 — CALCULATION OF VOLUMES
• 2.4.1 — TONNAGE VOLUMES BELOW UPPER DECK
• 2.4.2 — VOLUMES NOT TO BE INCLUDED IN THE TONNAGE CALCULATION
• 2.5 — CALCULATION OF ENCLOSED SPACES BELOW THE UPPER DECK
• 2.5.1 — MEASUREMENT
• 2.5.2 — DIVISION OF TONNAGE LENGTH
• 2.5.3 —TRANSVERSE SECTIONS
• 2.5.4 — DEPTH CORRECTION FOR CAMBER
• 2.5.5 — DEPTH OF TRANSVERSE SECTION (DS)
• 2.5.6 — DIVISION OF DEPTH OF TRANSVERSE SECTION
• 2.5.7 — BREADTHS OF TRANSVERSE SECTION
• 2.5.8 — CALCULATION OF TRANSVERSE SECTION
• 2.5.9 — CALCULATION OF VOLUME BELOW UPPER DECK
• 2.5.10 — ADDITIONAL VOLUMES OF ENCLOSED SPACES BELOW THE UPPER DECK
• 2.5.11 — EXCLUDED VOLUMES OF ENCLOSED SPACES BELOW THE UPPER DECK
• 2.6 — CALCULATIONS OF ENCLOSED SPACES ABOVE THE UPPER DECK
• 2.6.1 — APPLYING SIMPSON’S FIRST RULE TO ENCLOSED SPACES ABOVE THE UPPER DECK
• 2.6.2 — BETWEEN DECK SPACE
• 2.6.3 — BREAK, FORECASTLE, POOP, DECK HOUSE, SIDE HOUSE, TRUNK, HATCHWAY
• 2.7 — CALCULATION OF THE VOLUME OF CARGO SPACES
• 2.7.1 — CARGO SPACES BELOW THE UPPER DECK
• 2.7.2 — VOLUME OF CARGO SPACE BELOW UPPER DECK (4 PARTS)
• 2.7.3 — VOLUME OF CARGO SPACE BELOW UPPER DECK (6 OR 10 PARTS)
• 2.7.4 — CARGO SPACES ABOVE THE UPPER DECK
• 2.7.5 — INTERPRETATIONS OF COMPARTMENT VOLUMES FOR CARGO SPACES

• 3.1 — OPTIONS FOR MEASUREMENT
• 3.2 — TONNAGE BLOCK COEFFICIENT METHOD
• 3.3 — GROSS TONNAGE FORMULA (GT)
• 3.4 — THE NET TONNAGE FORMULA (NT)
• 3.5 — INCLUDED SPACES ABOVE THE UPPER DECK (V₂)
• 3.6 — MEASUREMENT OF SPACES
• 3.7 — EXCLUDED SPACES ABOVE THE UPPER DECK
• 3.8 — TABULAR METHOD

• Table 1 — Coefficient K₁ And K₂ For Sections 2.1 And 2.2
• Table 2 — Division of Tonnage Length
• Table 3 — Gross Tonnage Coefficients
• Table 4 — Net Tonnage Coefficients
• Table 5 — LOA vs. Tabular Gross and Net Tonnages

Figures

• Figure 1.0 — Length (Section 1.2)
• Figure 1.1 — Breadth (Section 1.1)
• Figure 1.2 — Camber (Section 1.1)
• Figure 1.3 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(i))
• Figure 1.4 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(ii))
• Figure 1.5 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(ii))
• Figure 1.6 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(ii))
• Figure 1.7 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(iii))
• Figure 1.8 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(iii))
• Figure 1.9 — Enclosed & Excluded Spaces (Subsection 1.1(B))
• Figure 1.10 — Enclosed & Excluded Spaces (Subsection 1.1(C))
• Figure 1.11 — Enclosed & Excluded Spaces (Subsection 1.1(E))
• Figure 1.12 — Ships with Rounded Gunwales (Section 1.1)
• Figure 1.13 — Enclosed & Excluded Spaces (Subsection 1.1(D))
• Figure 1.14 — Enclosed & Excluded Spaces (Section 1.1)
• Figure 1.15 — Moulded Depth (Section 1.1)
• Figure 1.16 — Upper Deck (Section 1.1)
• Figure 1.17 — Stepped Upper Deck (Section 1.1)
• Figure 1.18 — Stepped Upper Deck (Section 1.1)
• Figure 1.19 — Recessed Upper Deck (Section 1.1)
• Figure 1.20 —Upper Deck (Section 1.1)
• Figure 1.21 — (RESERVED)
• Figure 1.22a —Tonnage Length (Section 1.1)
• Figure 1.22b —Tonnage Length (Section 1.1)
• Figure 2.1 — Split Hull Barges and Dredges (Section 2.4.1)
• Figure 2.2 — Division of Tonnage Length (Section 2.5.2)
• Figure 2.3 — Parabolic Curved Camber (Subsection 2.5.4(a))
• Figure 2.4 — Straight Line Camber (Subsection 2.5.4(b))
• Figure 2.5 — Straight Line Camber (Subsection 2.5.4(c))
• Figure 2.6 — Depth of Transverse Section (Subsections 2.5.5(a), (b) and (c))
• Figure 2.7 — Depth of Transverse Section (Subsection 2.5.5(d))
• Figure 2.8 — Depth of Transverse Section (Section 2.5.5)
• Figure 2.9 — Depth of Transverse Section (Section 2.5.5)
• Figure 2.10 — Division of Depth of Transverse Section (Sections 2.5.6 and 2.5.7)
• Figure 2.11 — Calculation of Volume with Stepped Upper Deck (Section 2.5.9)
• Figure 2.12 — Overhang Beyond the Upper Deck (Section 2.5.10)
• Figure 2.13 — Overhang Deck (Section 2.5.10)
• Figure 2.14 — Bulbous and Similar Bows (Section 2.5.10)
• Figure 2.15 — Skegs and Keels (Section 2.5.10)
• Figure 2.16 — Shaft Bossing (Section 2.5.10)
• Figure 2.17 — Termination of Measurements (Section 2.6.1)
• Figure 2.18 — Breaks Forward and Foc’sles (Section 2.6.3)
• Figure 2.19 — Breaks Aft and Poops (Section 2.6.3)
• Figure 3.1 — Tonnage Measurement Dimensions TML, TMB (Section 3.2)
• Figure 3.2 — Breadth Measurement with Tumblehome (Section 3.2)
• Figure 3.3 — Tonnage Measurement Depth (TMD) (Section 3.2)
• Figure 3.4 — Measurement of Included Space above the Tonnage Deck (V₂) (Section 3.5)
• Figure 3.5 — Length Overall (LOA) for Tabular Method (Section 3.8)

NEXT