AERONAUTICS ACT

Teslin Airport Zoning Regulations

• Short Title
• Interpretation
• Application
• General
• SCHEDULE
• Established by

AERONAUTICS ACT

Teslin Airport Zoning Regulations

TESLIN AIRPORT

Short Title

Interpretation

"airport" means the Teslin Airport, in the vicinity of Teslin, in the Yukon Territory; (aéroport)

"airport reference point" means the point described in Part I of the schedule; (point de repère de l'aéroport)

"approach surfaces" means the imaginary inclined planes that extend upward and outward from each end of a strip, which planes are more particularly described in Part II of the schedule; (surfaces d'approche)

"outer surface" means an imaginary plane located above and in the immediate vicinity of the airport, which plane is more particularly described in Part III of the schedule; (surface extérieure)

"strip" means the rectangular portion of the landing area of the airport, including the runway, prepared for the take-off and landing of aircraft in a particular direction, which portion is more particularly described in Part IV of the schedule; (bande)

"transitional surfaces" means the imaginary inclined planes that extend upward and outward from the lateral limits of a strip and its approach surfaces, which planes are more particularly described in Part V of the schedule. (surfaces de transition)

(2) For the purposes of these Regulations, the elevation of the airport reference point is 692.2 m above sea level.

Application

General

(a) the approach surfaces;

(b) the outer surface; or

(c) the transitional surfaces.

SCHEDULE

PART I

Description of the Airport Reference Point

PART II

Description of the Approach Surfaces

(a) an inclined plane abutting the end of the strip associated with the approach to runway 08 having a ratio of 1 m measured vertically to 40 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 3 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 345 m from the projected centre line; said imaginary horizontal line being 75 m above the elevation at the end of the strip; and

(b) an inclined plane abutting the end of the strip associated with the approach to runway 26 having a ratio of 1 m measured vertically to 40 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 3 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 345 m from the projected centre line; said imaginary horizontal line being 75 m above the elevation at the end of the strip.

PART III

Description of the Outer Surface

PART IV

Description of the Strip

PART V

Description of the Transitional Surfaces

PART VI

Description of the Land to Which These Regulations Apply

Established by