Disclaimer: These documents are not the official versions (more).
Holman Airport Zoning Regulations
AERONAUTICS ACT
Holman Airport Zoning Regulations
AERONAUTICS ACT
Holman Airport Zoning Regulations
REGULATIONS RESPECTING ZONING AT HOLMAN AIRPORT
1. These Regulations may be cited as the Holman Airport Zoning Regulations.
2. (1) In these Regulations,
"airport" means the Holman Airport, in the vicinity of Holman, in the Northwest Territories;
(aéroport)
"airport reference point" means the point described in Part I of the schedule; (point de
référence de l'aéroport)
"approach surfaces" means the imaginary inclined planes that extend upward and outward
from each end of a strip, which planes are more particularly described in Part II of the
schedule; (surfaces d'approche)
"outer surface" means an imaginary plane located above and in the immediate vicinity of
the airport, which plane is more particularly described in Part III of the schedule;
(surface extérieure)
"strip" means the rectangular portion of the landing area of the airport, including the
runway, that is prepared for the take-off and landing of aircraft in a particular direction,
which rectangular portion is more particularly described in Part IV of the schedule;
(bande)
"transitional surfaces" means the imaginary inclined planes that extend upward and
outward from the lateral limits of a strip and its approach surfaces, which planes are
more particularly described in Part V of the schedule. (surfaces de transition)
(2) For the purposes of these Regulations, the elevation of the airport reference point is
32 m above sea level.
3. These Regulations apply to all land, including public road allowances, that is adjacent
to or in the vicinity of the airport, which land is more particularly described in Part VI of the
schedule.
4. No person shall erect or construct, on land to which these Regulations apply, a
building, structure or object or an addition to an existing building, structure or object, the
highest point of which will exceed in elevation at the location of that point
(a) the approach surfaces;
(b) the outer surface; or
(c) the transitional surfaces.
SCHEDULE
(Sections 2 and 3)
PART I
Description of the Airport Reference Point
The airport reference point, shown on Holman Airport Zoning Plan No. E.3038, dated
October 6, 1994, is a point located on the centre line of runway 062T-242T at a distance
of 655.3 m from the threshold of runway 062T.
PART II
Description of the Approach Surfaces
The approach surfaces, shown on Holman Airport Zoning Plan No. E.3038, dated
October 6, 1994, are planes abutting each end of the strip associated with runway 062T-242T and are described as follows:
(a) an inclined plane abutting the end of the strip associated with the approach to
runway 062T having a ratio of l m measured vertically to 40 m measured horizontally,
rising to an imaginary horizontal line drawn at right angles to the projected centre line of
the strip and distant 3 000 m measured horizontally from the end of the strip; the outer
ends of the imaginary horizontal line being 525 m from the projected centre line; said
imaginary horizontal line being 75 m above the elevation at the end of the strip; and
(b) an inclined plane abutting the end of the strip associated with the approach to
runway 242T having a ratio of l m measured vertically to 40 m measured horizontally,
rising to an imaginary horizontal line drawn at right angles to the projected centre line of
the strip and distant 3 000 m measured horizontally from the end of the strip; the outer
ends of the imaginary horizontal line being 525 m from the projected centre line; said
imaginary horizontal line being 75 m above the elevation at the end of the strip.
PART III
Description of the Outer Surface
The outer surface, shown on Holman Airport Zoning Plan No. E.3038, dated
October 6, 1994, is an imaginary plane established at a constant elevation of 45 m above
the elevation of the airport reference point, except that, where that plane is less than 9 m
above the surface of the ground, the outer surface is located at 9 m above the surface of
the ground.
PART IV
Description of the Strip
The strip associated with runway 062T-242T, shown on Holman Airport Zoning Plan
No. E.3038, dated October 6, 1994, is 150 m in width, 75 m being on each side of the
centre line of the runway, and 1 430.6 m in length.
PART V
Description of the Transitional Surfaces
Each transitional surface, shown on Holman Airport Zoning Plan No. E.3038, dated
October 6, 1994, is an inclined plane rising at a ratio of 1 m measured vertically to 7 m
measured horizontally at right angles to the centre line and projected centre line of the strip,
extending upward and outward from the lateral limits of the strip and its approach surfaces
to an intersection with the outer surface.
PART VI
Description of the Land to Which These Regulations Apply
The outer boundary of the land to which these Regulations apply, shown on Holman
Airport Zoning Plan No. E.3038, dated October 6, 1994, is a circle with a radius of
4 000 m centred on the airport reference point.
SOR/95-505 31 October, 1995 pursuant to section 5.4 of the Aeronautics Act.
|