|
Item |
STD 566 - Appendix C Part 2 Curriculum area
|
Hours |
STD 566 - Appendix C, Part 2 - examples of Theoretical
Training Objectives |
| 3.0 |
Technical Information |
|
- ATA System; Maintenance Manuals;
Illustrated Parts Catalogs; SRM; MIL Spec; NAS; Service Bulletins; Shop
records, work orders; Technical drawings; Aircraft hardware standards,
Manufacturer’s standards/specifications
|
| 4.0 |
General |
|
- Shop mathematics; Basic physics;
drafting standards; airrcraft drawings; Fastener codes; Schematic
diagrams; Dimensions and tolerances
|
| 5.0 |
Aircraft Systems |
|
- Fixed/rotary wing theory of
flight; flight control systems; propulsion systems, Hydraulic and
pneumatic systems; Landing gear systems; Environmental systems; Ice
protection systems; Fire protection systems; Emergency systems
|
| 7.0 |
Airframe Structures & Designs |
|
- Major assemblies - fixed/rotary
wing; Truss type, Monocoque/semi-monocoque fuselage construction;
Types/arrangements of landing gear; types of wing/rotor
arrangements/construction
|
| 8.0 |
Structural Materials |
|
- Ferrous/Non-ferrous metals;
composites, composite materials; wood; aluminum/titanium alloys; Monel;
Stainless/Chrome-molybdenum steel; Superalloys
|
| 9.0 |
Heat Treatment |
|
- Solution/Precipitation heat
treatment; Quenching; Natural/Artificial aging; Normalizing; Annealing;
Hardening; Tempering
|
| 10.0 |
Corrosion Control |
|
- Surface, Intergranular,
Exfoliation, Stress, Dissimilar metal, Fretting, Magnesium corrosion;
nickel/chrome plating processes; galvanizing; Metal cladding; Anodizing;
removal methods; cleaning processes
|
| 11.0 |
Damage Assessment |
|
- inspection; liquid penetrant,
Magnetic, Radiography, Ultrasonic, Eddy-current testing; Infrared
thermography
|
| 12.0 |
Sheet Metal Repairs |
|
- methods, techniques, and
practices; inspection methods; repair/replacement assessment; repair
materials
|
| 13.0 |
Standard & Special Fasteners |
|
- Standard aircraft screws, bolts,
nuts, washers, locking devices, rivets ; Special aircraft, bolts, nuts,
rivets ; Panel and cowling fasteners
|
| 14.0 |
Composite Repairs |
|
- protection methods/devices; Fiber
materials; Honeycomb/solid/foam core materials; Damage assessment methods;
Repair/replacement evaluation; Manufacturer’s specified repair methods;
Pre-impregnated fabrics
|
| 15.0 |
Tubular Repairs |
|
- methods, techniques, and
practices; Inspection methods for internal corrosion; replacement
materials; Repair or replacement evaluation
|
| 16.0 |
Wood Repairs |
|
- methods, techniques, and
practices; solid aircraft woods; aircraft plywoods; defects in aircraft
woods; Limitations on spar repairs; Visual, Stress inspection procedures
|
| 17.0 |
Fabric Repairs |
|
- fabrics and grades; re-covering
components; coating materials (dopes); additives; solvents and thinners;
retarders; rejuvenators; fabric deterioration/strength testing
|
| 18.0 |
Sheet Metal Fabrication |
|
- Protection; Transfer of
measurements; Lay-out procedures; Flat pattern lay-out; Templates;
Drilling jigs and assembly fixtures
|
| 19.0 |
Composite Fabrication |
|
- Master mould construction methods;
Autoclave curing procedures; Curing steps and cycles; Mould removal
methods
|
| 20.0 |
Fluid Lines & Conduits |
|
- Fluid lines identification codes;
Pressure, return, breather and drain lines; fluid lines - rigid/semi-rigid
pipe and tubing materials; bend distortion limits; Standard threaded pipe
and tube fittings; flaring angles
|
| 21.0 |
Thermoplastics |
|
- materials; Inspection;
Installation precautions; Repair or replacement; Storage and surface
protection
|
| Transport Canada review
results: |
|
|
|
Acceptable for structured training. |
| |
|
|
|
|
|
Additional training required - for example … |
| TC CASI/Officer (name / stamp) _______ Office:
_______ Date:______ |
|
