Figure 1.0 — Length (Section 1.2) ^

Figure 1.1 — Breadth (Section 1.1) ^

Figure 1.2 — Camber (Section 1.1) ^

Figure 1.3 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(i)) ^

Figure 1.4 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(ii)) ^

Figure 1.5 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(ii)) ^

Figure 1.6 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(ii)) ^

Figure 1.7 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(iii))

Figure 1.8 — Enclosed & Excluded Spaces (Paragraph 1.1(A)(iii)) ^

Figure 1.9 — Enclosed & Excluded Spaces (Subsection 1.1(B)) ^

Figure 1.10 — Enclosed & Excluded Spaces (Subsection 1.1(C)) ^

Figure 1.11 — Enclosed & Excluded Spaces (Subsection 1.1(E)) ^

Figure 1.12 — Ships with Rounded Gunwales (Section 1.1) ^ 

Figure 1.13 — Enclosed & Excluded Spaces (Subsection 1.1(D)) ^

Figure 1.14 — Enclosed & Excluded Spaces (Section 1.1) ^

Figure 1.15 — Moulded Depth (Section 1.1) ^

Figure 1.17 — Stepped Upper Deck (Section 1.1) ^

Figure 1.18 — Stepped Upper Deck (Section 1.1) ^

Figure 1.19 — Recessed Upper Deck (Section 1.1) ^

Figure 1.20 —Upper Deck (Section 1.1) ^

Figure 1.21 — (RESERVED) ^

Figure 1.22a —Tonnage Length (Section 1.1) ^

Figure 1.22b —Tonnage Length (Section 1.1) ^

Figure 2.1 — Split Hull Barges and Dredges (Section 2.4.1) ^

Figure 2.2 — Division of Tonnage Length (Section 2.5.2) ^

Figure 2.3 — Parabolic Curved Camber (Subsection 2.5.4(a)) ^

Figure 2.4 — Straight Line Camber (Subsection 2.5.4(b)) ^

Figure 2.5 — Straight Line Camber (Subsection 2.5.4(c)) ^

Figure 2.7 — Depth of Transverse Section (Subsection 2.5.5(d)) ^

Figure 2.8 — Depth of Transverse Section (Section 2.5.5) ^

Figure 2.9 — Depth of Transverse Section (Section 2.5.5) ^

Figure 2.10 — Division of Depth of Transverse Section
(Sections 2.5.6 and 2.5.7) ^

Figure 2.11 — Calculation of Volume with Stepped Upper Deck
(Section 2.5.9) ^

Figure 2.12 — Overhang Beyond the Upper Deck (Section 2.5.10) ^

Figure 2.13 — Overhang Deck (Section 2.5.10) ^

Figure 2.14 — Bulbous and Similar Bows (Section 2.5.10) ^

Figure 2.15 — Skegs and Keels (Section 2.5.10) ^

Figure 2.16 — Shaft Bossing (Section 2.5.10) ^

Figure 2.17 — Termination of Measurements (Section 2.6.1) ^

Figure 2.18 — Breaks Forward and Foc’sles (Section 2.6.3) ^

Figure 2.19 — Breaks Aft and Poops (Section 2.6.3) ^

Figure 3.1 — Tonnage Measurement Dimensions TML, TMB (Section 3.2) ^

Figure 3.2 — Breadth Measurement with Tumblehome (Section 3.2) ^

Figure 3.3 — Tonnage Measurement Depth (TMD) (Section 3.2) ^

Figure 3.4 — Measurement of Included Space above the Tonnage Deck (V₂)
(Section 3.5) ^

Figure 3.5 — Length Overall (LOA) for Tabular Method (Section 3.8) ^