Unitized Cargo Standard (1993) - Appendix III | TP 11232

Français

Help

Canada Site

Home	About us	Media room	Environment	Emergencies
Air	Marine	Rail	Road	Major issues

•	Table of Contents
•	Unitized Cargo
•	Appendix I
•	Appendix II SHT#1
•	Appendix II SHT#2
•	Appendix III SHT#1
•	Appendix III SHT#2
•	Appendix III SHT#3
•	Appendix III SHT#4
•	Appendix III SHT#5
•	Schedule 1
•	Schedule 2
•	PDF version

•	Marine Safety Publications
•	Marine Safety Home Page

Transport Canada > Marine Safety Home Page > Transport Publications | Marine Safety > Unitized Cargo Standard (2005) | TP 11232 | Marine Safety

PREVIOUS | TABLE OF CONTENTS | NEXT

APPENDIX III, SHT #1

UNITIZED CARGO ANNUAL CERTIFICATE
STANDING CERTIFICATE FOR WIRE UNITIZED PULP UNITS

Unitizing Plant	Sustained Tensile Test -(S) OR Ultimate Tensile Test (U)
Identifying Mark
Number of Units
Weight Per Unit	1.
Type of Unit	2.
Commodity	3.
Banding Specification	4.
Knot/Seal Specification	5.
Minimum Breaking Stress Required	6.
Minimum Safety Factor Required	7.
Lifting Method	8.
	9.
	10.
	11.
	12.
	14.
	15.
Lifting History 1.	16.
Lifting History 1.	17.
2.	18.
2.	19.
3.	20.
3.	21.
4.	22.
4.	23.
These units are suitable for lifting on provided the bands are not in a damaged condition.	24
	25.
	26.
Name & Address of Public Service Association Company or Firm making the tests:
Position of Signatory in Public Service, Association, Company or Firm:

I certify that on/or between/ the date/s of ............... 19 ...... and .............. 19 ...... samples of banding as sealed/knotted, were tested by a competent person, with the results as shown above. The banding tested was representative of the material used in the unitizing of the above cargo.
The frequency of testing was in accordance with Canadian Ministry of Transport requirements. The banding as applied to the above units at this time, is in good order.

(Signature)............................................ (Date)...................................................

PREVIOUS | TABLE OF CONTENTS | NEXT