|
![Skip all menus (access key: 2)](/web/20060212065252im_/https://www.tc.gc.ca/images/18px.gif) |
PREVIOUS | TABLE OF CONTENTS | NEXT
APPENDIX III, SHT #2
UNITIZED CARGO ANNUAL CERTIFICATE
STANDING CERTIFICATE FOR FLAT STRAP UNITIZED CARGO
1. Pulp mill or unitizing plant: |
2. Identifying mark: |
3. Number of units: |
4. Weight per unit: |
5. Type of unit: |
6. Number of bands fitted: Unitizing System: |
7. Banding
specification:
Width:
Thickness:
Minimum B.S.: |
8. Seal
specification: Position: |
9. Actual minimum breaking
strength for the band/seal
used:
/ |
10. Minimum safety factor
provided: |
11. Lifting method: |
12. Lifting history: |
|
|
|
|
|
These units are-suitable for lifting on
occasions provided the bands are not in a damaged condition. |
Name and address of public service, company,
association or firm making the tests: |
|
Position of signatory in public service, company, association or firm: |
|
I certify that between the dates of .................. 19..... and
.................. 19..... all
referenced units produced in this establishment have been given the identifying mark
shown above and have been unitized under a continuous quality control program. The
tests associated with the banding and its application have been carried out by a
competent person in accordance with the requirements of the Canadian Ministry of
Transport unitizing standards, and a record of these tests is maintained at this plant.
All units presented for shipment are in good order and meet or exceed Ministry
requirements. (Signature).............................................
(Date)...............................
|
PREVIOUS | TABLE OF CONTENTS | NEXT
|