Skip to the Site Index
Skip to Page Content
Environment Canada signature Canada Wordmark
Skip first menu
  Français Contact Us Help Search Canada Site
What's New
About Us
Topics Publications Weather Home
National Office of Pollution Prevention
Table of Contents
Abstract
Summary
1. Introduction
2. Monitoring/Direct Measurement of Releases
3. Analytical Methods
4. Quality Assurance/Quality Control
5. Estimation of Releases
6. Reporting
7. Validation / Verification
Glossary of Terms and Acronyms
References
Bibliography
Appendix A: Standardized Release Reporting Template
Appendix B: Error Estimation
Appendix C: US EPA AP-42 Emission Factors
GUIDANCE DOCUMENT FOR REPORTING OF RELEASES FROM THE BASE METALS SMELTING SECTOR

| TOC | Previous | Next |

Bibliography

Keith, Lawrence.H, Environmental Sampling and Analysis: A Practical Guide, Lewis Publishers Inc., 1991

Winegar, Eric D, Keith,Lawrence H., Sampling and Analysis of Airborne Pollutants, Lewis Publishers Inc.

J.K. Taylor, "Quality Assurance of Chemical Measurements", Lewis Publishers, 1987

Water Technology International, Multi-Media Sampling Training Course Reference Manual prepared for Environment Canada's Office of Enforcement, 1996

U.S. Environmental Protection Agency, Performance Specification 1 (PS-1), Federal Register, CFR 40 Part 60, Appendix B regarding installation and certification of a Continuous Opacity Monitoring System, 2001

U.S. Environmental Protection Agency, Performance Specification 2 to 13 (PS-2 to PS-13), Federal Register, CFR 40 Part 60, Appendix B regarding performance specification for Continuous Emissions Monitoring Systems, PS-2/1991, PS-3/1991, PS-4/1991, PS-5/1991, PS- 6/1988, PS-7/1990, PS-8/1996, PS-9/1994, PS-10/1996, PS-11/1996, PS-12/1996, PS-13/1996

Top of Page


| What's New | About Us | Topics | Publications | Weather | Home |
| Help | Search | Canada Site |
The Green LaneTM, Environment Canada's World Wide Web site
Important Notices