Food > Labelling > Guide to Food Labelling and Advertising > Chapter 2 Chapter 2: Sections 2.1-2.9 | Sections 2.10-2.18 | Annexes 2.10 Artificial Flavours [34, CPLR]When an artificial flavour (e.g., artificial apple flavour) is added to a food, whether alone or with natural flavouring agents, and a vignette on a food label suggests the natural flavour source (e.g., picture of an apple), a declaration that the added flavouring ingredient is an imitation, artificial or simulated flavour must appear on or adjacent to the vignette in both French and English. (See 3.3 of this Guide, Impressions and Vignettes.) This regulation applies to foods packaged for sale to consumers. The information must be in at least the same type height as that required for the numerals in the net quantity declaration. (See Minimum Type Height for Net Quantity, 2.6.1 of this Guide.) 2.11 Durable Life Date [B.01.007]"Durable life" is the period, starting on the day a food is packaged for retail sale, that the food will retain its normal wholesomeness, palatability and nutritional value, when it is stored under conditions appropriate for that product. A durable life date ("best-before" date) is required on prepackaged foods with a durable life of 90 days or less, with the following exceptions:
2.11.1 Foods Packaged at Other Than RetailWhen a food packaged at other than retail has a durable life of 90 days or less, a "best before"/"meilleur avant" date, and storage instructions (if they differ from normal room storage conditions), must be declared in both French and English on any panel except the bottom of the container. The date, however, may be placed on the bottom of the container, as long as a clear indication of its location is shown elsewhere on the label. [B.01.005 (4)] The bilingual symbols for the months in the durable life date are as follows:
If the year is required for clarity, the durable life date must be given with the year first (at least the last two digits), followed by the month and then the day. An example of an acceptable declaration is as follows: Best before 2.11.2 Foods Packaged at RetailRetail-packed foods with a durable life of 90 days or less may be labelled with either a durable life date and any necessary storage instructions, or a packaging date and accompanying durable life information, on the label or on a poster next to the food. 2.12 Previously FrozenThe words "previously frozen" must appear on the principle display panel or on an adjacent sign if frozen single ingredient meat or poultry (and their by-products), or single ingredient meat of any marine or fresh water animal (including fish) has been thawed prior to sale. Fish or other seafood which has been Frozen at Sea (FAS) and thawed prior to deboning, filleting, etc. must be labelled with a "previously frozen" statement. Where part of a food referred to above has been frozen and thawed prior to sale, the words "made from fresh and frozen portions" or "made from fresh and frozen (naming the food)" shall be shown in the same manner as described above. 2.13 Standard Container Sizes [36, CPLR ]Container sizes have been standardized under the CPLR for certain foods prepackaged for sale to consumers. These foods are listed in 2.13.1 of this Guide. In addition, the Canada Agricultural Products Act, the Fish Inspection Act and the Meat Inspection Act have established standard sizes for selected fresh and processed fruits and vegetables, dairy, honey and maple products, fish and selected meat and poultry products. 2.13.1 Standard Container Sizes for Wine, Syrups and Peanut Butter [36, CPLR]
2.14 Other Mandatory InformationOther mandatory information may be required depending on the food or the types of claims being made, e.g., percent alcohol by volume for alcoholic beverages [Division 2, FDR ], percent milk fat for some dairy products [Division 8, FDR ], percent acetic acid for vinegars [Division 19, FDR ], a declaration that a food contains or is sweetened with aspartame [Division 1, FDR], etc. Nutrient content declarations are required when nutrient content statements or claims are made (see Chapter 5 of this Guide). As with all mandatory information on labels, such statements must be in both French and English as required by B.01.012. 2.14.1 Food IrradiationThere are two aspects of food irradiation which are subject to federal controls: safety and labelling. Division 26 of the Food and Drug Regulations recognizes food irradiation as a food process. From a safety perspective, Health Canada is responsible for regulations specifying which foods may be irradiated and the treatment levels permitted. See the following Table 2-2 for the foods which may be irradiated and sold in Canada [B.26.003] Irradiated Foods Which May be Sold in Canada
|
Item | Food | Purpose of Treatment |
1. | Potatoes | To inhibit sprouting during storage |
2. | Onions | To inhibit sprouting during storage |
3. | Wheat, flour, whole wheat flour | To control insect infestation in stored food |
4. | Whole or ground spices and dehydrated seasoning preparations | To reduce microbial load |
Regulations for the labelling of irradiated foods are administered by the CFIA and apply equally to all domestic and imported foods in Canada. The labelling regulations as outlined in the Food and Drug Regulations [B.01.035] require the identification of wholly irradiated foods with both a written statement such as "irradiated" or "treated with radiation" or "treated by irradiation" and the international symbol:
Ingredients that constitute more than 10 percent of the final food must be identified in the list of ingredients as "irradiated". Signs accompanying bulk, displays of irradiated foods are also required to carry the same identification as that shown on package labels. Advertisements for irradiated foods must clearly reveal that the food has been irradiated.
Shipping containers also require the identification of wholly irradiated foods with a written statement such as "irradiated" or "treated with radiation" or "treated by irradiation" but do not require the international symbol.
Labels of shipping containers, such as those for commercial, industrial or institutional use, are exempt from bilingual labelling requirements. Shipping containers, for the purposes of this section, include both the outer cases and inner packages providing these are not for sale to consumers. Containers used to ship prepackaged retail food products may show the mandatory information in either official language if these containers are not sold directly to consumers. It is recommended that the labelling information be provided in the language of the client, but this is not required. Such products require a net quantity declaration under the Weights and Measures Act in either metric or Canadian measure. All other labelling information, as required by the FDR, must be provided as indicated in this document, including a list of ingredients.
In general, a Test Market Food must comply with current legislation in all respects, except for the bilingual labelling requirement and standardized container sizes under the Consumer Packaging and Labelling Regulations. Note: Other sets of regulations may also permit Test Market Foods, requirements should be verified with the applicable legislation.
By regulation, for a food to be granted a Test Market Food status, it must never have been sold in Canada in that form and must differ substantially from any other food sold in Canada with respect to its composition, function, state or packaging form. A Test Market Food includes food for which a manufacturer or distributor has been issued a Temporary Marketing Authorization Letter under FDR (see 2.17 of this Guide).
A dealer wishing to conduct a test market must, six weeks prior to conducting the test market, file a Notice of Intention to Test Market in the prescribed form and manner. The Notice of Intention to Test Market should be completed on company letterhead and should include the following:
a) | A description of the prepackaged product, together with submission of a sample in prepackaged form or alternatively, an illustration of the prepackaged product and the label; |
b) | The quantity to be distributed; |
c) | The period of time for test marketing (maximum period is 12 months); and |
d) | The geographic area or region in which the
test market is to be conducted.
|
e) | Dealers must also include information, with supporting data, to substantiate that the test market product was not previously sold in Canada in that form and to establish that it differs substantially from any other product sold in Canada with respect to its composition, function, state or packaging form. |
The Notice of Intention to Test Market should be addressed to:
Director, Bureau of Food Safety and Consumer Protection Canadian Food Inspection Agency 159 Cleopatra Drive Nepean, Ontario, K1A 0Y9 |
There is a distinction between a Test Market Food (see 2.15 of this Guide) and a food which has received Temporary Marketing Authorization.
A Temporary Marketing Authorization Letter (TMAL), issued by the Assistant Deputy Minister of the Health Products and Food Branch, Health Canada, authorizes the sale of a food that does not meet one or more of the compositional, packaging, labelling or advertising requirements under the Food and Drugs Act and Regulations. The authorization is granted for a specified period of time, within a designated area and in a specified quantity for a specific manufacturer or distributor. A TMAL does not exempt foods from the requirements under the Consumer Packaging and Labelling Act and Regulations.
The purpose of a Temporary Marketing Authorization is to generate information in support of a proposed amendment to the Food and Drug Regulations.
For example, as a condition for obtaining a TMAL for the use of non-permitted labelling on a food, the companies involved agree:
Once the TMAL is issued, those manufacturers or producers of foods which are subject to mandatory label registration through the CFIA (such as registered meats and processed products), will be expected to follow normal procedures to register their labels (see Chapter 1 of this Guide).
Applications for a Temporary Marketing Authorization Letter should be addressed to:
Assistant Deputy Minister Health Products and Food Branch Health Canada Ottawa, Ontario K1A 0L2 |
Questions regarding any procedural details in applying for the TMAL may be addressed to:
Chief, Nutrition Evaluation Division Bureau of Nutritional Sciences, Food Directorate Health Products and Food Branch Health Canada Ottawa, Ontario K1A 0L2 Tel. (613) 957-0352 Fax (613) 941-6636 |
The Interim Marketing Authorization (IMA), allows the sale of foods not in compliance with the regulations while an amendment to permit their ongoing legal sale is being processed. Permission is given through the publication of a Notice of Interim Marketing Authorization in Canada Gazette Part I and is effective beginning on the date of publication.
Categories of amendments eligible for IMA are limited to a food which:
a) | contains an agricultural chemical or any of its derivatives in excess of the maximum residue limit that has been established in Division 15, or for which a maximum residue limit has not been established; or |
b) | contains a veterinary drug in excess of the maximum residue limit established in Division 15, FDR, or for which a maximum residue limit has not yet been established; or |
c) | contains a food additive in excess of the level of use listed in Division 16, FDR, or for which there are no provisions in Division 16, FDR; or |
d) | contains an ingredient in a form not listed in the standard for that food in the Food and Drug Regulations; or |
e) | contains an added vitamin or mineral nutrient for which no provision is found in the Table to Division 3, Part D, FDR, or which is present at a level that is at variance with the prescribed level. |
An IMA does not have a fixed duration but remains in effect until the proposed regulatory amendment is promulgated in Canada Gazette Part II.
For more information, contact:
Director Bureau of Food Regulatory, International and Interagency Affairs A.L. 0702C Health Canada Ottawa, Ontario K1A 0L2 Tel. (613) 957-1828 Fax (613) 941-3537 |
Chapter 2: Sections 2.1-2.9 | Sections 2.10-2.18 | Annexes
Top of Page |
Important Notices |