Response to Comments on Revision of
"Thermal Power Generation Emissions - National Guidelines for New Stationary Sources", issued under the Canadian Environmental Protection Act, May 1993

| Next |

Table of Contents (TOC)

November 28, 2002

Section 1:	Introduction
1.1	Guiding Principles for the Guidelines
Section 2:	Process
2.1	Consultations with Stakeholders
2.2	Link to other Federal/Provincial Processes
2.3	Regulation versus Guidelines
2.4	Harmonization with U.S. Limits
Section 3:	Issues
3.1	Pollution Prevention
3.2	Regional Differences
3.3	Technology
3.4	Economic Considerations
3.5	Health and Environment
Section 4:	Scope
4.1	Notice of Intent
4.2	Implementation Date
4.3	Application to New and Modified Plants
4.4	Other Emission Reduction Programs
4.5	Other Pollutants
Section 5:	Emission Limits
5.1	General Comments on Emission Limits
5.2	SO₂ Emission Limits
5.3	NO_x Emission Limits
5.4	Particulate Matter Emission Limits
5.5	Opacity Emission Limit
5.6	Output Basis
5.7	Thermal Efficiency/Heat Rate
Section 6:	Compliance and Emission Testing and Monitoring
6.1	Compliance
6.2	Emission Testing and Monitoring
Glossary

	\| Français \| Contact Us \| Help \| Search \| Canada Site \| \| What's New \| About Us \| Topics \| Publications \| Weather \| Home \| \| Site Map \| Health Canada \| Related Links \| Registry Home \|

	The Green LaneTM, Environment Canada's World Wide Web site

	Last Update: 2002-12-27 Content Reviewed: 2002-12-27	Important Notices and Disclaimers
	URL of this page: http://www.ec.gc.ca/CEPARegistry/documents/glines/thermal/toc.cfm