Information To Dealers Of Second-Hand Children's Products

Playpens

• A label containing the following information must be permanently affixed to the product:
  
  
  1. Name and address of manufacturer;
  2. Model number;
  3. Date of manufacture;
  4. Statement: "This product complies with requirements of the Playpen Regulations (Canada)".

• Should not present any scissoring, shearing or pinching hazards. The joint at the top drop rail must be covered by a plastic pad or designed to eliminate shearing or pinching hazards.
• Height of side from the floor to top of rail must be 48 cm (18.9 in) or more.
• Should not have more than 2 wheels or casters or provisions for their attachment.

• Mesh in playpen will not permit the passage of a 6.4 mm (1/4 in) diameter rod (prevents finger or button entrapment).
• Playpen must be in good repair (refer to cribs).
• Cut metal tubing with ends accessible to occupant must be covered by a cap that cannot be removed with a 9 kg (20 lb) force.

• No attached straps, cords, etc. more than 18 cm (7 in) in length.
• Threaded end of bolts accessible to the occupant must be covered with acorn nuts.