NEXT

Standard for 5 ppm Bilge Alarms
(for Canadian Inland Waters)
April 1995

Table of Contents

• 1.0 Introduction

  • 2.0 Definitions

  • 3.0 Background

  • 4.0 Summary of Requirements

• Part 1 - General

  • 5.0 General Provisions

  • 6.0 Application

  • 7.0 Technical Specifications for "Bilge Alarms"

  • 8.0 Specification for Type Approval of Pollution Prevention Equipment

  • 9.0 Approval and Certification Procedures

• Part 2 - Test and Performance Specifications for Type Approval of Oil Content Meters for Bilge Alarms

  • 10.0 General Provisions

  • 11.0 Test specifications

  • 12.0 Calibration of Meter

  • 13.0 Calibration Test, Contaminant and colour test, Sample pressure or flow test, Shut off tests, Utilities supply variation test, Calibration and zero drift test, and Response time test

  • 14.0 Issuance of Certificate of Type Approval

• Part 3 - Method of Determination of Oil Content

  • 15.0 General

• Part 4 - Testing Facilities and Laboratories

  • 16.0 Accredited Testing Facility

  • 17.0 Accredited Testing Laboratory

• Schedule 1

  • Figure 1 - Diagrammatic Arrangements of Test Facilities

  • Figure 2 - Alternate Diagrammatic Arrangements of Test Facilities

  • Figure 3 - Diagram of Sampling Arrangements

• Schedule 2
  • Test Results
• Schedule 3

  • Figure 4 - Bilge Alarm Calibration Graph Format

• Schedule 4

  • List of Accredited Testing Facilities
    

NEXT