|
Project Directory |
|
|
Check It Out |
|
|
|
Deicing clears aircraft of winter precipitation and anti-icing protects them from
further contamination. The Holdover Time (HOT) Guidelines presented in Tables 1-4 are the Transport
Canada guidance material to help aircrew assess how long their aircraft is protected
from further contamination by winter precipitation. These guidelines, prepared and
approved by industry specialists and government agencies, provide holdover times
for fluids meeting SAE specifications [1, 2] for a wide range of winter weather
operating conditions. The ISO and ICAO holdover time documents refer to these
same tables.
Table 5 is a list of de/anti-icing fluids that meet the SAE required water spray and high humidity
endurance times and that are aerodynamically acceptable [1, 2].
Tables 6 and 7 present SAE procedures for deicing and anti-icing fluid application [3].
Light snow and very light snow columns are included in the Type I and Type III tables. All other tables provide holdover
times for moderate snowfall only. Table 8 links intensity to visibility [4].
Table 9 lists lowest on-wing viscosity values for anti-icing fluids, including dilutions.
Download the HOT Tables here: PDF version
References
- SAE Aerospace Material Specification, Deicing/Anti-icing Fluids, Aircraft,
SAE Type I, AMS 1424, latest revision
- SAE Aerospace Material Specification, Fluid, Aircraft Deicing/Anti-icing
Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV, AMS 1428,
latest revision
-
SAE Aerospace Recommended Practice, Aircraft Deicing/Anti-icing Methods with
Fluids, ARP 4737, latest revision
- Relation between Visibility and Snowfall Intensity
(TP 14151E), APS Aviation Inc., November 2003
|