|
|
|
Disclaimer: These documents are not the official versions (more).
MOTOR VEHICLE SAFETY ACTMotor Vehicle Safety RegulationsStandard 401Interior Trunk Release (Standard 401) 401. (1) Every passenger car and three-wheeled vehicle shall conform to the requirements for passenger cars set out in Technical Standards Document No. 401, Interior Trunk Release (TSD 401), as amended from time to time. (2) However, vehicles manufactured before September 1, 2010, need not be equipped with an interior trunk release. (3) This section does not apply to vehicles equipped with a back door, as defined in section S3 of TSD 401. (4) This section expires on January 1, 2012.
Established by:SOR/2007-180 July 31, 2007 pursuant to section 5 and subsection 11(1) of the Motor Vehicle Safety Act comes into force July 31, 2007. Schedule IV is amended by adding section 401 after section 305.
|
|
Transport Canada |
Pacific Region |
Prairie & Northern Region |
Ontario Region |
Quebec Region |
Atlantic Region |
About us |
Our offices |
Organization and senior management |
Departmental publications |
Programs and services |
Acts |
Regulations |
[More...] |
Media room |
Advisories |
Contacts |
e-news |
News releases |
Photo gallery |
Reference centre |
Speeches |
Video gallery |
[More...] |
Emergencies |
Emergencies and crises |
Emergency preparedness |
Security |
Transport of dangerous goods |
[More...] |
Air |
Our offices |
Passengers |
Pilots |
Flight instructors |
Maintenance technicians |
Commercial airlines |
Security |
Transport of dangerous goods |
[More...] |
Marine |
Our offices |
Small commercial vessels |
Large commercial vessels |
Pleasure craft |
Marine security |
Marine infrastructure |
Transport of dangerous goods |
[More...] |
Rail |
Our offices |
Safety at railway crossings |
Rail infrastructure |
Rail security |
Transport of dangerous goods |
[More...] |