|
|
|
PART 9 ROAD TABLE OF CONTENTS Definitions ROAD Definitions Definitions for the following terms, used in this Part, are provided in Part 1, Coming into Force, Repeal, Interpretation, General Provisions and Special Cases:
According to the definition of "import", when dangerous goods being imported are being transported to a place in Canada, the person who imports the dangerous goods is the consignor. If the dangerous goods are being transported through Canada, each person who transports them in Canada (that is, each carrier) is the consignor while in possession of the dangerous goods. 9.1 Transporting Dangerous Goods from the United States into or through Canada Consignments of dangerous goods that originate in the United States are subject to expert inspection by U.S. inspectors. These consignments can be transported in Canada under the requirements of 49 CFR. However, consignments that originate in Canada are not permitted under these Regulations to be transported in Canada under 49 CFR only, because these consignments are not subject to expert inspection by U.S. inspectors. (1) Despite the requirements in Part 2, Classification, Part 3, Documentation, and Part 4, Dangerous Goods Safety Marks, a person may handle or transport dangerous goods by road vehicle from a place in the United States to a place in Canada or from a place in the United States through Canada to a place outside Canada in accordance with the classification, marking, labelling, placarding and documentation requirements of 49 CFR, if
(2) Subsection (1) does not apply to dangerous goods that
9.2 Transporting Dangerous Goods to or from an Aircraft, an Aerodrome or an Air Cargo Facility (1) Despite the requirements in Part 2, Classification, Part 3, Documentation, and Part 4, Dangerous Goods Safety Marks, if transport has been or is to be by aircraft, a person may handle or transport dangerous goods by road vehicle to or from an aircraft, an aerodrome or an air cargo facility in accordance with the classification, marking, labelling, and documentation requirements of the ICAO Technical Instructions, if
(2) Subsection (1) does not apply if these Regulations forbid the transport of the dangerous goods or if the dangerous goods are not regulated by the ICAO Technical Instructions but are regulated by these Regulations. (3) When dangerous goods are transported to or from an aircraft, an aerodrome or an air cargo facility in a large means of containment, placards that correspond to the labels displayed on a means of containment in accordance with the ICAO Technical Instructions must be displayed on the large means of containment in accordance with Part 4, Dangerous Goods Safety Marks. SOR/2002-306 9.3 Transporting Dangerous Goods to or from a Ship, a Port Facility or a Marine Terminal (1) Despite the requirements in Part 2, Classification, Part 3, Documentation, and Part 4, Dangerous Goods Safety Marks, if transport has been or is to be by ship, a person may handle or transport by road vehicle an international consignment of dangerous goods to or from a ship, a port facility or a marine terminal in accordance with the classification, marking, labelling, placarding and documentation requirements of the IMDG Code if
(2) Subsection (1) does not apply if these Regulations forbid the transport of the dangerous goods or if the dangerous goods are not regulated by the IMDG Code but are regulated by these Regulations. (3) When dangerous goods are transported in a large means of containment to or from a ship, a port facility or a marine terminal, the large means of containment must have placards displayed on it in accordance with Part 4, Dangerous Goods Safety Marks, or the IMDG Code. (1) When a consignment of dangerous goods is transported from a place outside Canada to a place in Canada and is reshipped within Canada by road vehicle, the dangerous goods safety marks displayed in accordance with 49 CFR, the ICAO Technical Instructions or the IMDG Code at the time of entry into Canada may continue to be displayed, except that the large means of containment containing the dangerous goods must have placards displayed on it in accordance with Part 4, Dangerous Goods Safety Marks. (2) The shipping document that accompanies the dangerous goods must include a notation that the dangerous goods safety marks are in accordance with 49 CFR, the ICAO Technical Instructions or the IMDG Code, if they differ from the ones required to be displayed by Part 4, Dangerous Goods Safety Marks. |
|
Transport Canada |
Pacific Region |
Prairie & Northern Region |
Ontario Region |
Quebec Region |
Atlantic Region |
About us |
Our offices |
Organization and senior management |
Departmental publications |
Programs and services |
Acts |
Regulations |
[More...] |
Media room |
Advisories |
Contacts |
e-news |
News releases |
Photo gallery |
Reference centre |
Speeches |
Video gallery |
[More...] |
Emergencies |
Emergencies and crises |
Emergency preparedness |
Security |
Transport of dangerous goods |
[More...] |
Air |
Our offices |
Passengers |
Pilots |
Flight instructors |
Maintenance technicians |
Commercial airlines |
Security |
Transport of dangerous goods |
[More...] |
Marine |
Our offices |
Small commercial vessels |
Large commercial vessels |
Pleasure craft |
Marine security |
Marine infrastructure |
Transport of dangerous goods |
[More...] |
Rail |
Our offices |
Safety at railway crossings |
Rail infrastructure |
Rail security |
Transport of dangerous goods |
[More...] |